-
ELET-519 Wrist Strap On-Line Monitor (P/N: T00043)
(for monitoring two wrist straps)
Features:
– No checking is required.
– Instant warning of wrist trap fallure increases production efficienoy.
– Highly reliable, easy and convenlent to use.
Specifications:
– Input: 6V DC
– Dimensions (for 518): 67 x 60 x 29mm
– Weight (for 518): 60g (excludingthe adaptor)
– Dimensions (for 519): 110 x 60 x 29mm
– Weight (for 519): 100g (excludingthe adaptor) -
ELET-518 Wrist Strap On-Line Monitor (P/N: T00044)
(for monitoring one wrist strap)
Features:
– No checking is required.
– Instant warning of wrist trap fallure increases production efficienoy.
– Highly reliable, easy and convenlent to use.
Specifications:
– Input: 6V DC
– Dimensions (for 518): 67 x 60 x 29mm
– Weight (for 518): 60g (excludingthe adaptor)
– Dimensions (for 519): 110 x 60 x 29mm
– Weight (for 519): 100g (excludingthe adaptor) -
ELET-498 Wrist Strap Tester (P/N: T00046)
– Can be used anywere to quickly and easily check griunding systems, such as wrist straps anf grounding wire.
– Touching the mat with your hand when grounding wire is connected.
– The green “Good: indicator will be on and buzzing when you have a safe grounding system.Indicator: Low (red)
Standar Impedance: R < 800KΩ
Sound: NoIndicator: Good (green)
Standar Impedance: 800KΩ < R < 9MΩ
Sound: YesIndicator: Hight (red)
Standar Impedance: R > 9MΩ
Sound: No -
SL-032 Dual Footwear / Wrist Strap Tester (P/N: T00196)
Sl- 032 is a 3-state touch tester designed for fast, trequent testing of personel grounding device.
Fast testing separately for wrist traps and grounder test inits.
Easy to operate.Tester Net Weight: 250g
Dimensions:
Tester: 160 x 100 x 40mm
Shelf: 400 x 250 x800mm
Pedal: 400 x 400mm -
ELET-100 Wrist Strap Tester (P/N: T00196)
It is a portable wrist strap tester, equipped with a 9 volts battery. It verifies that a continuous path between
the operatior’s wrisr strap and ground cord exits. With a test voltage of 9 volts DC, the tester is specialy to
perform the test without harm to the operatorLED Display: OK (green)
Resistance (±5%): 800KΩ – 10MΩ
Indicator: OFFLED Display: OK (yellow)
Resistance (±5%): above 10MΩ
Indicator: ONNLED Display: LO (red)
Resistance (±5%): below 800KΩ
Indicator: ONN -
SL-006A Copper Ionizing Air Bar (P/N: T00217)
Rigid copper casing; neutralize static charges with air assistance.
Suiable for a wide variety of harsh working conditions.
Operate with SL-008 Power Supply which needs to be ordered separately.Operating Voltage: 5.6Kv
Current Consumtion: 230 µA/M
Length: 2000mm/200mm
Air Consumption: 10LPM/hole -
SL-041 Ionizing Air Curtain (P/N: T00216)
Eliminate stalios and blow off dust.
Aluminium casting, electric shock proof design.
Operate with SL-009 Power Supply which needs to be ordered separately.HV Cable: 3m
Max & Min Length: 2000mm / 200mm
Current Consumtion: 0.6mA -
SL-040 Ionizing Air Bar (P/N: T00215)
It produces ions with hight velocity air neutralize stactic charge.
Aluminium casting, electric shock proof design.
Operate with SL-009 Power Supply which needs to be ordered separately.HV Cable: 3m
Max & Min Length: 2000mm / 200mm
Current Consumtion: 0.4mA -
SL-011 Startic Bar (P/N: T00214)
Aluminium casing, electric shock proof design.
Operate with SL-007 Power Supply which needs to be ordered separately.HV Cable: 3m
Max & Min Length: 2000mm / 200mm
Current Consumtion: 0.52mA -
SL-080AF Ionizing Air Snake Sensor (P/N: T00213)
Features:
Adjustable air volume, balance voltage: 0V ±30V
The flexible nozzle can be positioned to produce a clean ionized stream to a target surface.
Operate with SL-007 Power Supply which needs to be ordered separately.
Specifications:Operating Voltage: 4.6 KV
Current Consumption: 350 µA
Weitgh: 1.6kg
Length Pressure: 32.5cm
Air Pressure: 40-70 psi
Air Velocity: 10m/sec
Discharge Time (5000V – 500V) at 15cm): ≤1.5s -
SL-080A Ionizing Air Snake (P/N: T00212)
Features:
Adjustable air volume, balance voltage: 0V ±30V
The flexible nozzle can be positioned to produce a clean ionized stream to a target surface.
Operate with SL-007 Power Supply which needs to be ordered separately.
Specifications:Operating Voltage: 4.6 KV
Current Consumption: 350 µA
Weitgh: 1.6kg
Length Pressure: 32.5cm
Air Pressure: 40-70 psi
Air Velocity: 10m/sec
Discharge Time (5000V – 500V) at 15cm): ≤1.5s -
SL-005C Ionizing Air Nozzle (P/N: T00029)
Features:
It neutralizes charges in very speccific areas like inaccessible spots. It can be convenlently
installed on to a fixed work station. Air nozzle has an effective area of 1.000mm.
Operate with SL-007 Power Supply which needs to be ordered separately.
Specifications:Operating Voltage: 4.6 KV
Current Consumption: 350 µA
Operating Temprature: 0 – 50oC
Weitgh: 0.6kg
HV Cable: 3M
Air Pressure: 40-100 psi
Air Velocity: 10m/sec -
SL-005 Ionizing Air Nozzle (P/N: T00030)
It neutralizes charges in very speccific areas like inaccessible spots. It can be convenlently
installed on to a fixed work station. Air nozzle has an effective area of 1.000mm.
Operate with SL-007 Power Supply which needs to be ordered separately.Current Consumption: 4.6 KV
Operatin Voltage: 350 µA
Weitgh: 0.4kg
Air Pressure: 40-70 psi
Air Velocity: 10m/sec -
SL-280 Hawk Gun (P/N: T00031)
– Forceful blast of ionizing air flow to eliminate dust and static charge.
– Light touch switch control.
– Adlustable air flow.
– Ergonomic and light weight design with filter.
Suitable for use in class 100 cleanroom. -
SL-004H Ionizing Air Gun (P/N: T00210)
Light plastic gun body, coaxial shielding cable; durable and safer;
Operate with SL-007 Power Supply which needs to be ordered separately.Operating Voltage: 4.6 KV
Current Consumption: 350 µA
Weight: 0.5 kg
HV Cable: 3 M
Air Pressure: 40-70 psi
Air Velocity: 10m/sec -
SL-004 Ionizing Air Gun (P/N: T00023)
SL-004 Air Gun is designed for focused cleaning and neutralization.
Operate with SL-007 Power Supply Which needs to be ordered separately.Operating Voltage: 4.6 KV
Current Consumption: 350 µA
Weight: 0.5 kg
HV Cable: 3 M
Air Pressure: 40-70 psi
Air Velocity: 10m/sec -
SL-111D Mini DC Ionizing Air Blower (P/N: T00207)
The body is extremily light and small. Most suitable for constrained working areas.
Current Consumption: 0.04A / 0.02A
Limited Power: ≤ 3.6W
Converage Range: 120mm x 120mm
Weight: Switch Box: 0,75kg, Blower: 0,28 kg, Stand: 1,2kg
Ion Balance: ≤ ±5V
Size: 150(L) x 145(w) x 40(H) mm -
SL-801D Ionizing Air Blower with Warning Function (P/N: T00206)
Current Consumption: 0.08A / 0.04A
Size: 108(L) x 95(W) X 200(H)mm
Weight: 1.4 kg
Art Volume: 50 – 90CFM
Limited Power: ≤15w
Ion Balance: ≤±5v -
DC-001B DC Ionizing Air Blower (P/N: T00203)
Current Consumption: 0.08A / 0.04A
Air Coverage: 300mm x 300mm
Size: 190(L) x 70(W) X 195(H)mm
Weight: 1.8 kg
Air Volume: 50 – 90CFM
Limited Power: ≤15w
Ion Balance: ≤±5v -
DC-003 DC Ionizing Air Blower (P/N: T00205)
Current Consumption: 0.18A / 0.09A
Air Coverage: 40cm x 120cm
Size: 1070(L) x 170(W) X 90(H)mm
Art Volume: 150-270CFM
Weight: 3.9 kg -
DC-002 DC Ionizing Air Blower (P/N: T00204)
Current Consumption: 0.16A / 0.08A
Air Coverage: 40cm x 80cm
Size: 690(L) x 170(W) X 90(H)mm
Art Volume: 100-170CFM
Weight: 3 kg -
SL-028 Bench Top Air Blower (P/N: T00202)
Current Consumption: 3.2A / 1.6A
Size: 460(L) x 285(W) X 155(H)mm
Art Volume: 70-120CFM
Weight: 7.6 kg -
SL-010 Bench Top Ionizing Air Blower (P/N: T00035)
Current Consumption: 3.3A / 1.65A
Air Coverage: 60cm x 60cm
Size: 570(L) x 255(W) X 125(H)mm
Art Volume: 45-190CFM
Weight: 8.6 kg -
SL-1205 Overhead lonizing Air Blower (P/N: T00201)
Current Consumption: 1.3A / 0.65A
Size: 930(L) x 200(W) X 180(H)mm
Art Volume: 200-410CFM
Weight: 14.5 kg -
SL-1104 Overhead lonizing Air Blower (P/N: T00200)
Current Consumption: 1.3A / 0.65A
Size: 1100(L) x 170(W) X 125(H)mm
Art Volume: 180-420CFM
Weight: 8.1 kg -
SL-003 Overhead lonizing Air Blower (P/N: T00036)
Current Consumption: 0.9A / 0.45A
Air Coverage: 40cm x 120cm
Size: 1100(L) x 170(W) X 125(H)mm
Art Volume: 120-330CFM
Weight: 6.6 kg -
SL-002 Overhead lonizing Air Blower (P/N: T00037)
Current Consumption: 0.9A / 0.45A
Air Coverage: 40cm x 80cm
Size: 600(L) x 170(W) X 116(H)mm
Art Volume: 80-220CFM
Weight: 4.8 kgXem tiếpThe product is already in the wishlist!Browse Wishlist -
SL-001 Bench Top Ionizing Air Blower (P/N: T00038)
Current Consumption: 0.25A / 0.12A
Air Coverage: 40cm x 60cm
Size: 190(L) x 110(W) X 245(H)mm
Weight: 3 kg
Art Volume: 45-110CFM
- Home
- >
- Lonizers & ESD Testers
