-
ELET-519 Wrist Strap On-Line Monitor (P/N: T00043)
(for monitoring two wrist straps)
Features:
– No checking is required.
– Instant warning of wrist trap fallure increases production efficienoy.
– Highly reliable, easy and convenlent to use.
Specifications:
– Input: 6V DC
– Dimensions (for 518): 67 x 60 x 29mm
– Weight (for 518): 60g (excludingthe adaptor)
– Dimensions (for 519): 110 x 60 x 29mm
– Weight (for 519): 100g (excludingthe adaptor) -
ELET-518 Wrist Strap On-Line Monitor (P/N: T00044)
(for monitoring one wrist strap)
Features:
– No checking is required.
– Instant warning of wrist trap fallure increases production efficienoy.
– Highly reliable, easy and convenlent to use.
Specifications:
– Input: 6V DC
– Dimensions (for 518): 67 x 60 x 29mm
– Weight (for 518): 60g (excludingthe adaptor)
– Dimensions (for 519): 110 x 60 x 29mm
– Weight (for 519): 100g (excludingthe adaptor) -
ELET-498 Wrist Strap Tester (P/N: T00046)
– Can be used anywere to quickly and easily check griunding systems, such as wrist straps anf grounding wire.
– Touching the mat with your hand when grounding wire is connected.
– The green “Good: indicator will be on and buzzing when you have a safe grounding system.Indicator: Low (red)
Standar Impedance: R < 800KΩ
Sound: NoIndicator: Good (green)
Standar Impedance: 800KΩ < R < 9MΩ
Sound: YesIndicator: Hight (red)
Standar Impedance: R > 9MΩ
Sound: No -
SL-032 Dual Footwear / Wrist Strap Tester (P/N: T00196)
Sl- 032 is a 3-state touch tester designed for fast, trequent testing of personel grounding device.
Fast testing separately for wrist traps and grounder test inits.
Easy to operate.Tester Net Weight: 250g
Dimensions:
Tester: 160 x 100 x 40mm
Shelf: 400 x 250 x800mm
Pedal: 400 x 400mmXem tiếpThe product is already in the wishlist!Browse Wishlist -
ELET-100 Wrist Strap Tester (P/N: T00196)
It is a portable wrist strap tester, equipped with a 9 volts battery. It verifies that a continuous path between
the operatior’s wrisr strap and ground cord exits. With a test voltage of 9 volts DC, the tester is specialy to
perform the test without harm to the operatorLED Display: OK (green)
Resistance (±5%): 800KΩ – 10MΩ
Indicator: OFFLED Display: OK (yellow)
Resistance (±5%): above 10MΩ
Indicator: ONNLED Display: LO (red)
Resistance (±5%): below 800KΩ
Indicator: ONN -
SL-006A Copper Ionizing Air Bar (P/N: T00217)
Rigid copper casing; neutralize static charges with air assistance.
Suiable for a wide variety of harsh working conditions.
Operate with SL-008 Power Supply which needs to be ordered separately.Operating Voltage: 5.6Kv
Current Consumtion: 230 µA/M
Length: 2000mm/200mm
Air Consumption: 10LPM/hole -
SL-041 Ionizing Air Curtain (P/N: T00216)
Eliminate stalios and blow off dust.
Aluminium casting, electric shock proof design.
Operate with SL-009 Power Supply which needs to be ordered separately.HV Cable: 3m
Max & Min Length: 2000mm / 200mm
Current Consumtion: 0.6mA -
SL-040 Ionizing Air Bar (P/N: T00215)
It produces ions with hight velocity air neutralize stactic charge.
Aluminium casting, electric shock proof design.
Operate with SL-009 Power Supply which needs to be ordered separately.HV Cable: 3m
Max & Min Length: 2000mm / 200mm
Current Consumtion: 0.4mA -
SL-011 Startic Bar (P/N: T00214)
Aluminium casing, electric shock proof design.
Operate with SL-007 Power Supply which needs to be ordered separately.HV Cable: 3m
Max & Min Length: 2000mm / 200mm
Current Consumtion: 0.52mA -
SL-080AF Ionizing Air Snake Sensor (P/N: T00213)
Features:
Adjustable air volume, balance voltage: 0V ±30V
The flexible nozzle can be positioned to produce a clean ionized stream to a target surface.
Operate with SL-007 Power Supply which needs to be ordered separately.
Specifications:Operating Voltage: 4.6 KV
Current Consumption: 350 µA
Weitgh: 1.6kg
Length Pressure: 32.5cm
Air Pressure: 40-70 psi
Air Velocity: 10m/sec
Discharge Time (5000V – 500V) at 15cm): ≤1.5s -
SL-080A Ionizing Air Snake (P/N: T00212)
Features:
Adjustable air volume, balance voltage: 0V ±30V
The flexible nozzle can be positioned to produce a clean ionized stream to a target surface.
Operate with SL-007 Power Supply which needs to be ordered separately.
Specifications:Operating Voltage: 4.6 KV
Current Consumption: 350 µA
Weitgh: 1.6kg
Length Pressure: 32.5cm
Air Pressure: 40-70 psi
Air Velocity: 10m/sec
Discharge Time (5000V – 500V) at 15cm): ≤1.5s -
SL-005C Ionizing Air Nozzle (P/N: T00029)
Features:
It neutralizes charges in very speccific areas like inaccessible spots. It can be convenlently
installed on to a fixed work station. Air nozzle has an effective area of 1.000mm.
Operate with SL-007 Power Supply which needs to be ordered separately.
Specifications:Operating Voltage: 4.6 KV
Current Consumption: 350 µA
Operating Temprature: 0 – 50oC
Weitgh: 0.6kg
HV Cable: 3M
Air Pressure: 40-100 psi
Air Velocity: 10m/sec -
SL-005 Ionizing Air Nozzle (P/N: T00030)
It neutralizes charges in very speccific areas like inaccessible spots. It can be convenlently
installed on to a fixed work station. Air nozzle has an effective area of 1.000mm.
Operate with SL-007 Power Supply which needs to be ordered separately.Current Consumption: 4.6 KV
Operatin Voltage: 350 µA
Weitgh: 0.4kg
Air Pressure: 40-70 psi
Air Velocity: 10m/sec -
SL-280 Hawk Gun (P/N: T00031)
– Forceful blast of ionizing air flow to eliminate dust and static charge.
– Light touch switch control.
– Adlustable air flow.
– Ergonomic and light weight design with filter.
Suitable for use in class 100 cleanroom.
- Home
- >
- Lonizers & ESD Testers
