-
ELET-100 Wrist Strap Tester (P/N: T00196)
It is a portable wrist strap tester, equipped with a 9 volts battery. It verifies that a continuous path between
the operatior’s wrisr strap and ground cord exits. With a test voltage of 9 volts DC, the tester is specialy to
perform the test without harm to the operatorLED Display: OK (green)
Resistance (±5%): 800KΩ – 10MΩ
Indicator: OFFLED Display: OK (yellow)
Resistance (±5%): above 10MΩ
Indicator: ONNLED Display: LO (red)
Resistance (±5%): below 800KΩ
Indicator: ONN -
SL-032 Dual Footwear / Wrist Strap Tester (P/N: T00196)
Sl- 032 is a 3-state touch tester designed for fast, trequent testing of personel grounding device.
Fast testing separately for wrist traps and grounder test inits.
Easy to operate.Tester Net Weight: 250g
Dimensions:
Tester: 160 x 100 x 40mm
Shelf: 400 x 250 x800mm
Pedal: 400 x 400mm -
ELET-498 Wrist Strap Tester (P/N: T00046)
– Can be used anywere to quickly and easily check griunding systems, such as wrist straps anf grounding wire.
– Touching the mat with your hand when grounding wire is connected.
– The green “Good: indicator will be on and buzzing when you have a safe grounding system.Indicator: Low (red)
Standar Impedance: R < 800KΩ
Sound: NoIndicator: Good (green)
Standar Impedance: 800KΩ < R < 9MΩ
Sound: YesIndicator: Hight (red)
Standar Impedance: R > 9MΩ
Sound: No -
ELET-518 Wrist Strap On-Line Monitor (P/N: T00044)
(for monitoring one wrist strap)
Features:
– No checking is required.
– Instant warning of wrist trap fallure increases production efficienoy.
– Highly reliable, easy and convenlent to use.
Specifications:
– Input: 6V DC
– Dimensions (for 518): 67 x 60 x 29mm
– Weight (for 518): 60g (excludingthe adaptor)
– Dimensions (for 519): 110 x 60 x 29mm
– Weight (for 519): 100g (excludingthe adaptor) -
ELET-519 Wrist Strap On-Line Monitor (P/N: T00043)
(for monitoring two wrist straps)
Features:
– No checking is required.
– Instant warning of wrist trap fallure increases production efficienoy.
– Highly reliable, easy and convenlent to use.
Specifications:
– Input: 6V DC
– Dimensions (for 518): 67 x 60 x 29mm
– Weight (for 518): 60g (excludingthe adaptor)
– Dimensions (for 519): 110 x 60 x 29mm
– Weight (for 519): 100g (excludingthe adaptor) -
Thermometer (P/N: T00315)
– Providing reliable temperature control of soidering tips
– Compact design saves your workspace and allows
you to carry it around easily
– Extremely fine sensor with high temperature reactivity
is incorprated -
Thermometer (P/N: T00023)
– Test the temperature of soodering iron precisely and quichky
– Clear LCD indication
– Sensors are esay to be replaced
– Wide testing temperature range of 0 C – 600 C -
Smoke Absorber (P/N: T00308)
– Removes soidering fumes quickly, safely and efficiently
– Power: 13W/15W
– Domensions 166(W) x 212(H) x 113(D)mm
– Weight: 0.93 kg -
ESD Smoke Absorber (P/N: T00221)
– Easy to replace the activitated carbon filter; low noise
– Power: 14W/16W
– Domensions 220 x 270 x 168mm
– with etra 2pcs of replacement carbon filter -
Rework Station (P/N: T00288)
– With digital display, easy to control the hot air temperature visually
– Featuring airflow meter, easy to control the airflow volume
– automatic cooling funciton protects and extends the usage life of the
systemPower Consumpotin: 700W
Temperaturre Range: 100 – 420 C
Air Pump Type: Diaphragm Pump
Air Capacity: 24 L/min (max)
Power of the iron: 60W
Temperaturre Range of the iron: 200 – 480 C -
Rework Station (P/N: T00025)
– Wide range of temperature and airflow adjust
– Cool air will start to blow continuously after using, to avoid the
header damge
– Especially suitable for repairing QFP, SOP, PLCC and SOF compomentPower Consumpotin: 700W
Temperaturre Range: 100 – 420 C
Air Pump Type: Diaphragm Pump
Air Capacity: 24 L/min (max) -
Rework Station (P/N: T00225)
– With digital display, easy to control the hot air temperature visually
– Featuring airflow meter, easy to control the airflow volume
– automatic cooling funciton protects and extends the usage life of
the systemPower Consumpotin: 700W
Temperaturre Range: 100 – 420 C
Air Pump Type: Diaphragm Pump
Air Capacity: 24 L/min (max) -
Rework Station (P/N: T00289)
– Rapid warning, accurate and stabllzed temperature
– Easy to operate: when the user grips the handle which has the sensor
switch, the system will quickly enter the operating mode; when the
user puts the handle back to the handle carrier, the system will
automatically enter the standby mode.
– Automatic cooling function protects and ecxtends the usage life of
the system
Brushless fan design, longer life, minimal noisePower Consumpotin: 700W
Temperaturre Range: 100 – 420 C
Air Pump Type: Diaphragm Pump
Air Capacity: 24 L/min (max)
Power of the iron: 60W
Temperaturre Range of the iron: 200 – 480 C -
BGA Rework Station (P/N: T00328)
– With the liner slide, all the X, Y, X axis can do precision adjustment and fast
positioning
– HD touch screen, PLC control, can save multiple sets of temperature
profile data; with instant temperature curve analysis function
– 3 independent heating areas from top on to bottom. The 1st and 2nd are
hot air heaters, the 3rd is IR preheating, temperature controlled within +- 3
C –
Offer all kinds of hot air nozzles which can rotate 360; with magnet, easy to install and change
– Use a V-groove equipped with a flexible fixture for PCB positioning to protect the PCB from deformation when heated or cooled; it can
rework any BGA package size
– Powerful cross-flow fan rapidty cool the PCB to improve efficiency; Also built-in vacuum pump and external vacuum suction pen, pick
up the Chips rapidtyTotal Power: 4800W
Top Heater Power: 800W
Bottom Heater Power: 2nd heater: 1200W, 3rd IR heater: 2700W
Dimensions: 635 x 600 x 560mm
Positioning: V-groove, with external iniversal fixture
Temperature Control: K-type thermocouple (closed loop control)
PCB Size: Max: 410 x 370mm Min: 20 x 20mm
Net Weight: 40Kg
